Accurate Automation Corporation

Contact Us

7001 Shallowford Road
Chattanooga, TN 37421

E-mail: Sales@accurate-
automation.com
Phone: 423-894-4646
Fax: 423-894-4645
Videophone: 423-510-8448

Directions

Product Overview:

The AAC Fiber Optic Receiver board consists of 6 fiber optic receivers capable of rates up to 250 kilobaud over a maximum 4 km distance. Two power and ground inputs are available, and each channel is capable of using either power and ground via selection jumpers. This allows isolated systems to use the same receiver board. The output signal goes through a DB25 connector from a high impedance CMOS device, which defines the output characteristics of the board. The DB25 connector is shown in Figure 1 and Table 1. Download a more detailed document for the input and output boards here (Zipped PDF format).

Features:

• 6 Fiber­Optic Receivers Per Board
• Signal Rates up to 250 kilobaud
• Link Distances up to 4 km
• CMOS Output
• Two Separate Power and Ground Selections for Driving Multiple Systems
• Schmitt­Trigger on Each Output
• Power and Output Signals Connected to a Single Female DB25
• Low Power Consumption (150 mWMAX with No Load)
• Supply Voltage 5 Volts
• 1 Amp per Channel Maximum Power Output
• Compact Lightweight Design

Applications:

• System Isolation for RF/EMI Noise Reduction
• PWM or and Digital Signal Reception
• Unmanned Aircraft (UAVs) and R/C System
• Computer to Peripheral Links
• Signal Reception Over Large Distances

Ordering Options:

The AAC­FORx6­1.10 board can be ordered separately or in an enclosure. The enclosure version contains 2 boards for a total of 12 receivers.